Damascus Steel Cowboy Knife BS-CB-304

Damascus Steel Cowboy Knife BS-CB-304

$ 65
In Stock
Easy to Carry Damascus Steel Cowboy Skinner knife

— Blade Length: 4.00″

— Blade Length: 4.00″

— Blade Material: Damascus Steel

— Blade Thickness: 3/16″

— Blade Hardness: 56-58 HRC

— Blade Style: Drop Point

— Blade Grind: V Grinding

— Blade Type: Fixed Blade

— Blade Finish: Matt

— Handle Material: Blue Color Bone

— Overall Length: 9.00″

 

Compare
Add to Wishlist
Add to Wishlist
SKU: BS-CB-304Category:

Handmade Damascus Steel Cowboy Knife Full Tang Handy Knife-  File work on knife Spine with Stabilized  Handle Red Color Bone and Fine Quality Horizontal Cowboy Cross draw Sheath Snug Fit

Easy to Carry Damascus Steel Cowboy knife

— Blade Length: 4.00″,

— Blade Length: 4.00″

— Blade Material: Damascus Steel

— Blade Thickness: 3/16″

— Blade Hardness: 56-58 HRC

— Blade Style: Drop Point

— Blade Grind: V Grinding

— Blade Type: Fixed Blade

— Blade Finish: Matt

— Handle Material: Blue Color Bone

— Overall Length: 9.00″,

The High Grade Damascus steel Cowboy Knife used for these blades consists of layers of low carbon & high carbon (1095&15N20) mixture welded, forged and hammered several times to obtain Up to 200 Layers. The hardness of these blades is up to 56 to 58 HRC on the Rockwell scale providing sharp edges that are designed for lots of use. Precision heat treating methods are employed to provide the sharpest, most enduring edges available. Only quality materials have been used to create this beautiful Knife. For the collectors this knife is stylish and built to last. How to care for your new knives: (You will receive a set of care instructions with your purchase) ~ Store in a dry place, moisture encourages rust. Damascus is very easy to clean if rusted but is rust resistant. ~ After use, wash and dry the blade & apply vegetable oil, or any food safe lubricating oil. ~ Sometimes Damascus steel darkens with age. To brighten up the blade, sand it lengthwise with a worn piece of sand paper. This just hits the raised portions of the etched pattern and makes the blade look brighter. No two items are ever identical; the item you receive may be slightly different to the pictures shown. Damascus steel is a refined method of forging steel where the anvil and the hammer determine just what kind of knife is made each time. The use of natural materials i.e., buffalo horn, stag horn, wood and camel bone means that variations in color and slight imperfections may be present but make each knife that much more unique. cowboy knife

Fore More:

Visit FB:

 

There are no reviews yet.

Be the first to review “Damascus Steel Cowboy Knife BS-CB-304”

Your email address will not be published. Required fields are marked *

You may also like…

  • Compare
  • Quick view
    Add to Wishlist
    Add to Wishlist
  • Quick Comparison

    SettingsDamascus Steel Cowboy Knife BS-CB-304 removeDamascus Steel Cowboy Knife BS-CB-322 removeDamascus Steel Cowboy Knife BS-CB-311 removeDamascus Steel Cowboy Knife BS-CB-305 removeDamascus Steel Cowboy Knife BS-CB-318 removeDamascus Steel Cowboy Knife BS-CB-312 remove
    Imagecowboy knifecowboy knife BS-BC-322cowboy knife BS-BC-311cowboy knife bs-cb-305cowboy knife BS-BC-318cowboy knife BS-BC-312
    SKUBS-CB-304BS-CB-322BS-CB-311BS-CB-305BS-CB-318BS-CB-312
    Rating
    Price $ 65 $ 75 $ 75 $ 65 $ 75 $ 75
    Stock
    Availability
    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Description

    Easy to Carry Damascus Steel Cowboy Skinner knife

    — Blade Length: 4.00″ — Blade Length: 4.00″ — Blade Material: Damascus Steel — Blade Thickness: 3/16″ — Blade Hardness: 56-58 HRC — Blade Style: Drop Point — Blade Grind: V Grinding — Blade Type: Fixed Blade — Blade Finish: Matt — Handle Material: Blue Color Bone — Overall Length: 9.00″  

    Easy to Carry Damascus Steel Cowboy knife

    — Blade Length: 4.00″ — Blade Length: 4.00″ — Blade Material: Damascus Steel — Blade Thickness: 3/16″ — Blade Hardness: 56-58 HRC — Blade Style: Clip Point — Blade Grind: V Grinding — Blade Type: Fixed Blade — Blade Finish: Damascus Steel — Handle Material: Bone with scrimshaw art work — Overall Length: 8.00″

    Easy to Carry Damascus Steel Cowboy knife

    — Blade Length: 4.00″ — Blade Length: 4.00″ — Blade Material: Damascus Steel — Blade Thickness: 3/16″ — Blade Hardness: 56-58 HRC — Blade Style: Clip Point — Blade Grind: V Grinding — Blade Type: Fixed Blade — Blade Finish: Damascus Steel — Handle Material: Bone with scrimshaw art work — Overall Length: 8.00″
    Easy to Carry Damascus Steel Cowboy knife — Blade Length: 4.00″, — Blade Length: 4.00″ — Blade Material: Damascus Steel — Blade Thickness: 3/16″ — Blade Hardness: 56-58 HRC — Blade Style: Drop Point — Blade Grind: V Grinding — Blade Type: Fixed Blade — Blade Finish: Matt — Handle Material: Blue Color Bone — Overall Length: 8.00″,

    Easy to Carry Damascus Steel Cowboy knife

    — Blade Length: 4.00″ — Blade Length: 4.00″ — Blade Material: Damascus Steel — Blade Thickness: 3/16″ — Blade Hardness: 56-58 HRC — Blade Style: Clip Point — Blade Grind: V Grinding — Blade Type: Fixed Blade — Blade Finish: Damascus Steel — Handle Material: Bone with scrimshaw art work — Overall Length: 8.00″
    Easy to Carry Damascus Steel Cowboy knife — Blade Length: 4.00″ — Blade Length: 4.00″ — Blade Material: Damascus Steel — Blade Thickness: 3/16″ — Blade Hardness: 56-58 HRC — Blade Style: Clip Point — Blade Grind: V Grinding — Blade Type: Fixed Blade — Blade Finish: Damascus Steel — Handle Material: Bone with scrimshaw art work — Overall Length: 8.00″
    Content

    Handmade Damascus Steel Cowboy Knife Full Tang Handy Knife-  File work on knife Spine with Stabilized  Handle Red Color Bone and Fine Quality Horizontal Cowboy Cross draw Sheath Snug Fit

    Easy to Carry Damascus Steel Cowboy knife — Blade Length: 4.00″, — Blade Length: 4.00″ — Blade Material: Damascus Steel — Blade Thickness: 3/16″ — Blade Hardness: 56-58 HRC — Blade Style: Drop Point — Blade Grind: V Grinding — Blade Type: Fixed Blade — Blade Finish: Matt — Handle Material: Blue Color Bone — Overall Length: 9.00″, The High Grade Damascus steel Cowboy Knife used for these blades consists of layers of low carbon & high carbon (1095&15N20) mixture welded, forged and hammered several times to obtain Up to 200 Layers. The hardness of these blades is up to 56 to 58 HRC on the Rockwell scale providing sharp edges that are designed for lots of use. Precision heat treating methods are employed to provide the sharpest, most enduring edges available. Only quality materials have been used to create this beautiful Knife. For the collectors this knife is stylish and built to last. How to care for your new knives: (You will receive a set of care instructions with your purchase) ~ Store in a dry place, moisture encourages rust. Damascus is very easy to clean if rusted but is rust resistant. ~ After use, wash and dry the blade & apply vegetable oil, or any food safe lubricating oil. ~ Sometimes Damascus steel darkens with age. To brighten up the blade, sand it lengthwise with a worn piece of sand paper. This just hits the raised portions of the etched pattern and makes the blade look brighter. No two items are ever identical; the item you receive may be slightly different to the pictures shown. Damascus steel is a refined method of forging steel where the anvil and the hammer determine just what kind of knife is made each time. The use of natural materials i.e., buffalo horn, stag horn, wood and camel bone means that variations in color and slight imperfections may be present but make each knife that much more unique. cowboy knife Fore More: Visit FB:  

    Handmade Damascus Steel Cowboy Knife Full Tang Handy Knife-  File Work on Spine with Stabilized  Handle Bone with scrimshaw art work and Fine Quality Horizontal Cowboy Cross draw Sheath Snug Fit

    Easy to Carry Damascus Steel Cowboy knife — Blade Length: 4.00″ — Blade Length: 4.00″ — Blade Material: Damascus Steel — Blade Thickness: 3/16″ — Blade Hardness: 56-58 HRC — Blade Style: Clip Point — Blade Grind: V Grinding — Blade Type: Fixed Blade — Blade Finish: Damascus Steel — Handle Material: Bone with scrimshaw art work — Overall Length: 8.00″   The High Grade Damascus steel cowboy knife used for these blades consists of layers of low carbon & high carbon (1095&15N20) mixture welded, forged and hammered several times to obtain Up to 200 Layers. The hardness of these blades is up to 56 to 58 HRC on the Rockwell scale providing sharp edges that are designed for lots of use. Precision heat treating methods are employed to provide the sharpest, most enduring edges available. Only quality materials have been used to create this beautiful Knife. For the collectors this knife is stylish and built to last. How to care for your new knives: (You will receive a set of care instructions with your purchase) ~ Store in a dry place, moisture encourages rust. Damascus is very easy to clean if rusted but is rust resistant. ~ After use, wash and dry the blade & apply vegetable oil, or any food safe lubricating oil. ~ Sometimes Damascus steel darkens with age. To brighten up the blade, sand it lengthwise with a worn piece of sand paper. This just hits the raised portions of the etched pattern and makes the blade look brighter. No two items are ever identical; the item you receive may be slightly different to the pictures shown. Damascus steel is a refined method of forging steel where the anvil and the hammer determine just what kind of knife is made each time. The use of natural materials i.e., buffalo horn, stag horn, wood and camel bone means that variations in color and slight imperfections may be present but make each knife that much more unique. cowboy knife   FOR MORE:   VISIT FB:

    Handmade Damascus Steel Cowboy Knife Full Tang Handy Knife-  File Work on Spine with Stabilized  Handle Bone with scrimshaw art work and Fine Quality Horizontal Cowboy Cross draw Sheath Snug Fit

    Easy to Carry Damascus Steel Cowboy knife — Blade Length: 4.00″ — Blade Length: 4.00″ — Blade Material: Damascus Steel — Blade Thickness: 3/16″ — Blade Hardness: 56-58 HRC — Blade Style: Clip Point — Blade Grind: V Grinding — Blade Type: Fixed Blade — Blade Finish: Damascus Steel — Handle Material: Bone with scrimshaw art work — Overall Length: 8.00″   The High Grade Damascus steel cowboy knife used for these blades consists of layers of low carbon & high carbon (1095&15N20) mixture welded, forged and hammered several times to obtain Up to 200 Layers. The hardness of these blades is up to 56 to 58 HRC on the Rockwell scale providing sharp edges that are designed for lots of use. Precision heat treating methods are employed to provide the sharpest, most enduring edges available. Only quality materials have been used to create this beautiful Knife. For the collectors this knife is stylish and built to last. How to care for your new knives: (You will receive a set of care instructions with your purchase) ~ Store in a dry place, moisture encourages rust. Damascus is very easy to clean if rusted but is rust resistant. ~ After use, wash and dry the blade & apply vegetable oil, or any food safe lubricating oil. ~ Sometimes Damascus steel darkens with age. To brighten up the blade, sand it lengthwise with a worn piece of sand paper. This just hits the raised portions of the etched pattern and makes the blade look brighter. No two items are ever identical; the item you receive may be slightly different to the pictures shown. Damascus steel is a refined method of forging steel where the anvil and the hammer determine just what kind of knife is made each time. The use of natural materials i.e., buffalo horn, stag horn, wood and camel bone means that variations in color and slight imperfections may be present but make each knife that much more unique. cowboy knife   FOR MORE:  VISIT FB: 

    Handmade Damascus Steel Cowboy Knife Full Tang Handy Knife with Stabilized  Handle Pokka Wood and Bone and Fine Quality Horizontal Cowboy Cross draw Sheath Snug Fit

    Easy to Carry Damascus Steel Cowboy knife — Blade Length: 4.00″ — Blade Length: 4.00″ — Blade Material: Damascus Steel — Blade Thickness: 3/16″ — Blade Hardness: 56-58 HRC — Blade Style: Drop Point — Blade Grind: V Grinding — Blade Type: Fixed Blade — Blade Finish: Matt — Handle Material: Blue Color Bone — Overall Length: 8.00″   The High Grade Damascus steel cowboy knife used for these blades consists of layers of low carbon & high carbon (1095&15N20) mixture welded, forged and hammered several times to obtain Up to 200 Layers. The hardness of these blades is up to 56 to 58 HRC on the Rockwell scale providing sharp edges that are designed for lots of use. Precision heat treating methods are employed to provide the sharpest, most enduring edges available. Only quality materials have been used to create this beautiful Knife. For the collectors this knife is stylish and built to last. How to care for your new knives: (You will receive a set of care instructions with your purchase) ~ Store in a dry place, moisture encourages rust. Damascus is very easy to clean if rusted but is rust resistant. ~ After use, wash and dry the blade & apply vegetable oil, or any food safe lubricating oil. ~ Sometimes Damascus steel darkens with age. To brighten up the blade, sand it lengthwise with a worn piece of sand paper. This just hits the raised portions of the etched pattern and makes the blade look brighter. No two items are ever identical; the item you receive may be slightly different to the pictures shown. Damascus steel is a refined method of forging steel where the anvil and the hammer determine just what kind of knife is made each time. The use of natural materials i.e., buffalo horn, stag horn, wood and camel bone means that variations in color and slight imperfections may be present but make each knife that much more unique. cowboy knife   For More:  Visit FB

    Handmade Damascus Steel Cowboy Knife Full Tang Handy Knife-  File Work on Spine with Stabilized  Handle Bone with scrimshaw art work and Fine Quality Horizontal Cowboy Cross draw Sheath Snug Fit

    Easy to Carry Damascus Steel Cowboy knife — Blade Length: 4.00″ — Blade Length: 4.00″ — Blade Material: Damascus Steel — Blade Thickness: 3/16″ — Blade Hardness: 56-58 HRC — Blade Style: Clip Point — Blade Grind: V Grinding — Blade Type: Fixed Blade — Blade Finish: Damascus Steel — Handle Material: Bone with scrimshaw art work — Overall Length: 8.00″   The High Grade Damascus steel cowboy knife used for these blades consists of layers of low carbon & high carbon (1095&15N20) mixture welded, forged and hammered several times to obtain Up to 200 Layers. The hardness of these blades is up to 56 to 58 HRC on the Rockwell scale providing sharp edges that are designed for lots of use. Precision heat treating methods are employed to provide the sharpest, most enduring edges available. Only quality materials have been used to create this beautiful Knife. For the collectors this knife is stylish and built to last. How to care for your new knives: (You will receive a set of care instructions with your purchase) ~ Store in a dry place, moisture encourages rust. Damascus is very easy to clean if rusted but is rust resistant. ~ After use, wash and dry the blade & apply vegetable oil, or any food safe lubricating oil. ~ Sometimes Damascus steel darkens with age. To brighten up the blade, sand it lengthwise with a worn piece of sand paper. This just hits the raised portions of the etched pattern and makes the blade look brighter. No two items are ever identical; the item you receive may be slightly different to the pictures shown. Damascus steel is a refined method of forging steel where the anvil and the hammer determine just what kind of knife is made each time. The use of natural materials i.e., buffalo horn, stag horn, wood and camel bone means that variations in color and slight imperfections may be present but make each knife that much more unique. cowboy knife   FOR MORE:    VISIT FB: 

    Handmade Damascus Steel Cowboy Knife Full Tang Handy Knife-  File Work on Spine with Stabilized  Handle Bone with scrimshaw art work and Fine Quality Horizontal Cowboy Cross draw Sheath Snug Fit

    Easy to Carry Damascus Steel Cowboy knife — Blade Length: 4.00″ — Blade Length: 4.00″ — Blade Material: Damascus Steel — Blade Thickness: 3/16″ — Blade Hardness: 56-58 HRC — Blade Style: Clip Point — Blade Grind: V Grinding — Blade Type: Fixed Blade — Blade Finish: Damascus Steel — Handle Material: Bone with scrimshaw art work — Overall Length: 8.00″   The High Grade Damascus steel cowboy knife used for these blades consists of layers of low carbon & high carbon (1095&15N20) mixture welded, forged and hammered several times to obtain Up to 200 Layers. The hardness of these blades is up to 56 to 58 HRC on the Rockwell scale providing sharp edges that are designed for lots of use. Precision heat treating methods are employed to provide the sharpest, most enduring edges available. Only quality materials have been used to create this beautiful Knife. For the collectors this knife is stylish and built to last. How to care for your new knives: (You will receive a set of care instructions with your purchase) ~ Store in a dry place, moisture encourages rust. Damascus is very easy to clean if rusted but is rust resistant. ~ After use, wash and dry the blade & apply vegetable oil, or any food safe lubricating oil. ~ Sometimes Damascus steel darkens with age. To brighten up the blade, sand it lengthwise with a worn piece of sand paper. This just hits the raised portions of the etched pattern and makes the blade look brighter. No two items are ever identical; the item you receive may be slightly different to the pictures shown. Damascus steel is a refined method of forging steel where the anvil and the hammer determine just what kind of knife is made each time. The use of natural materials i.e., buffalo horn, stag horn, wood and camel bone means that variations in color and slight imperfections may be present but make each knife that much more unique. cowboy knife   FOR MORE:    VISIT FB:
    Weight
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information